What do you know about the under cap filling machine?

The under cap filling machine is a machine that integrates vacuuming, quantitative filling, sealing and recycling. It is a special equipment that needs to be sealed immediately after filling from the (coreless valve) valve cover under the vacuum state.

• What is the difference between under cap filling machine and traditional aerosol production equipment?

• What is under cap filling machine?

• How to maintain under cap filling machine?

What is the difference between under cap filling machine and traditional aerosol production equipment?

The difference is quite large, as follows:

1. The general aerosol filling machine has three processes: filling, sealing and inflation, but the process of the under cap filling machine is: vacuuming, inflation and sealing.

2. But in terms of equipment, general aerosols are manually operated or the entire assembly line, either too low-end or too expensive, the under cap filling machine is relatively moderate, and it is still a small assembly line.

3. The under cap filling machine is novel, fashionable and safe, suitable for modern assembly line production.

What is under cap filling machine?

The under cap filling machine includes can handler, under cap filling machine, valve feeder, conveyor belt, explosion-proof motor, etc. The automatic under-cap refrigerant aerosol filling machine can also be equipped with a labeling machine, a weighing machine, a water bath leak tester, etc. The automatic cap-down aerosol filling machine is a special equipment that requires the product to be sealed immediately after filling from the (non-core valve) cap under vacuum. This machine is set up to evacuate, fill and seal. It can also be used as a capper.

How to maintain under cap filling machine?

1. The under cap filling machine has strict requirements on the placement environment. It must ensure moderate indoor humidity, ventilation and sanitation, because the filling machine is mechanical equipment after all, and the raw materials are some steel electrical machinery, etc., and it is very difficult to place in a humid environment. It is easy to rust, and the closed environment is not conducive to the heat dissipation of the equipment during operation.

2. Before use, it is necessary to ensure that the power supply of the under cap filling machine is normal, as well as the safety of the ground wire. The damage to the machine caused by voltage instability is considerable.

3. Before running the under cap filling machine, a non-woven soft cloth and cleaning agent must be used to wipe off the oil or dirt, and then wipe it dry. After use, all the remaining materials should be taken out to prevent the materials from corroding the equipment and scrubbing clean.

4. Regularly clean up the under cap filling machine. Many companies conduct major maintenance on machinery and equipment once a year in the fall.

5. Regularly add lubricating oil to the mechanical components of the under cap filling machine to reduce frictional resistance and make the machine run faster.

6. Periodically clean the invisible dust and garbage in the chassis.

7. Form a maintenance team to adhere to the tightness of all parts of the machine.

Yangzhou Meida Filling Machinery Co.,Ltd, which has been established for over ten years, focuses on the production of under cap filling machines. Here, you can find the under cap filling machines you need.